Motorbike Systems
Magneti Marelli for over 20 years has supplied systems/components for the main motorbikes manufacturers, like Ducati, Piaggio and Harley Davidson.
Our systems follow the current emissions laws (EURO 3), maintaining the high standards of performance requested by the market.
Moreover, Magneti Marelli Powertrain has the essential know-how that enables to manage the entire development of systems/components, from the design to the production.
Motorbikes electronic control unit
Control unit for Mono-bi cylinders gasoline engine.
ECU IAW 15x
Description
Motorbikes Mono-Bi cyilinder Gasoline Electronic Control Unit applications with idle air control and 2 integrated ignition coils driver.Benefits
- Small size housing
- Fully software & logic core configurability to meet customer requirement
ECU IAW 5Dx
Description
Euro3 Ride-By-Wire Motorbike Engine Control Unit for 4 cyilinder Gasoline applications with electronic air throttle body control and 4 integrated ignition coils driver.Benefits
- Engine mounting
- High electronics integration
- Small size housing
- Wiring harness optimisation
- Torque based strategy for better driveability
- Fully software & logic core configurability to meet customer requirement
ECU MIUx
Description
Full Mono Cylinder Motorbike Mechatronic system Euro 3 Engine control unit;
Mechanical throttle body with Internal Idle Air Control
Integrated Throttle Contactless angular position sensor.
Benefits
- Engine mounting
- High electronics integration
- Very Small size housing
- Wiring harness optimisation
- Fully software & logic core configurability to meet customer requirement
ECU 7Sx
Description
Euro3 Ride-By-Wire Motorbike Engine Control Unit for 4 cyilinder Twin Injectors Gasoline applications with Twin electronic air throttle body control and 4 integrated ignition coils driver.High End Motorbikes Applications
Benefits
- Engine mounting
- High electronics integration
- Small size housing
- Wiring harness optimisation
- Torque based strategy for better driveability
- Fully software & logic core configurability to meet customer requirement
Motorbikes throttle bodies
Aluminium body, throttle and axle in stainless steel
Mechanical throttle bodies
Aluminium body, throttle and axle in metal.
1/2/4 barrels
Cylindrical and oval barrels to maximize the rate between the air flow and the space filled by the throttle body.
Diameters from 32 to 60mm.
Contact/contactless throttle body position sensor.
Idle control device with stepper motor or choke.
“Drive by Wire” throttle bodies for motorbikes applications
Aluminium body, throttle and axle in metal.
They are equipped with a “gas demand” component, complying the most strict laws about safety.
Diameters from 32 to 60mm.
Contact/contactless throttle body position sensor.
Product specific characteristics following the most demanding motorcycle market requests.
Mechatronic throttle body integrated in the engine control unit
Aluminium body, throttle and axle in metal.
Available for mono cylindrical applications from 125 to 500 cc.
Diameters from 32 to 40mm.
Idle control device with stepper motor.
Electronic version with cylindrical valve.
Contactless position sensor of the throttle body.
Product specific characteristics following the most demanding motorcycle market requests.